Epoxy Paints - K-3001

Technical Data Sheet

K-3001 is a two component Polyamide cured epoxy Glossy enamel. The coating remain unaffected by many corrosive chemicals and solvents.

Uses :
  • » Oil Refineries
  • » Chemical Plants
  • » Sugar Mills
  • » Fertilizer Plants
  • » Pulp & Paper Mills
  • » Gas Plants
  • » Food & Pharmaceutical units
Application Details :
  • » Method of application : Spray / Brush
  • » Pot life.................... :6–8 Hrs
  • » Thinner...................: Epoxy Thinner 301
  • » Thinner Intake......... :15–20% by Volume
Product Specification :
Parameter Specification
COLOUR Selected Range
FINISH Glossy
FLASH POINT Above 20º C
MIXING RATIO PAINT : HARDNER
  3 : 1 ( By volume)
VOLUME SOLIDS 40% Approx.
DFT 30–35 Microns
THEORETICAL SPREADING RATE 10–12 Sq.meter per litre
DRYING TIME S.D. 2–4 Hrs
  H.D. 8–12 Hrs
  FULL CURE–7 Days
OVER COATING INTERVAL 18 Hrs Minimum
STORAGE LIFE 12 Months in sealed container
Under standard conditions

Storage :

Store in dry place away from heat source and & direct sunlight. Avoid temp. more than 30 degree C.