Epoxy Paints - K-3002

Technical Data Sheet

K-3002 is a two component Polyamide cured, epoxy anticorrosive primer containing Zinc Phosphate Pigments. The primer gives excellent adhesion to steel. It is compatible with a wide range of topcoats and form highly efficient protective film for corrosive and chemical environments. It has excellent resistance to waste water, oil & chemical.

Uses :
  • » Petrochemical Units
  • » Pulp and Paper mills
  • » Fertilizer Plant
  • » Leaf Spring Industries
  • » Refineries
Product Specification :

PRODUCT SPECIFICATION Specification
Colour Grey / Red Oxide / Black STEEL SURFACES: Degrease and blast clean or manual cleaning and remove loose rust. Surface should be perfectly clean and dry before applying K – 3002 Zinc Phosphate Primers.

Method of application:

Brush / Roller / Spray

Pot life……… : 3 – 4 Hrs
Thinner…… EP Thinner 302
Thinner Intake… :15 – 20% by
Volume
Finish Matt to Egg Shell
FLASH POINT Above 20º C
MIXING RATIO PAINT : HARDNER
  4 : 1 ( By volume)
VOLUME SOLIDS 40% Approx.
DFT 30 – 35 Microns
THEORETICAL SPREADING RATE 12 – 14 Sq.meter per litre
DRYING TIME Surface Dry. 2 – 3 Hrs
  Handleable 6 – 8 Hrs
  Full cure – 7 Days
OVER COATING INTERVAL 18 Hrs Minimum
STORAGE LIFE 12 Months in sealed container
Under standard conditions